WARNINGS TO V2 MAG QL DATA USERS:

IN LATE NOVEMBER 2006, THE V2 S/C ERRORNEOUSLY COMMANDED THE MAG INSTRUMENT 
TO TURN ON THE OUTBOARD MAGNETOMETER FLIPPER HEATER. THE HEATER WAS LEFT ON 
FAR TOO LONG AND THE MECHANISM DAMAGED BUT NOT DESTROYED.  THE TRIAXIAL SENSOR 
ENDED RE-ORIENTED TO A POSITION ~58 DEGREES FROM EITHER DESIGNED END POINT.  
AS A RESULT:

1. THE QL DATA HAS NOT BEEN AND CANNOT BE CORRECTED FOR THE EFFECTS OF THIS 
EVENT IN NEAR REAL TIME.

2. THE QL DATA ARE ALSO NOT CORRECTED FOR TIME VARIATIONS OF THE INDIVIDUAL 
SENSOR AXES' ZEROS. THIS TASK REQUIRES S/C ROLL CALIBRATIONS WHICH OCCUR ~ 
EVERY 3-6 MONTHS.  THIS ZERO CORRECTION TASK IS MANDATORY BEFORE PRODUCTION 
MAG DATA CAN BE CREATED.

3. THE MAG TEAM STRONGLY ADVISES AGAINST ANY ATTEMPTS AT ANY SCIENTIFIC USE OF 
THE QL DATA BY ANYONE.

4. THE PRODUCTION DATA WILL CORRECTED FOR ITEMS 1 AND 2 AND IS CURRENTLY 
ESTIMATED TO BE ACCURATE TO WITHIN ± APPROXIMATELY 0.04 nT

5. CAVEAT EMPTOR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!