; FAST FIELDS INSTRUMENT MODE: 249 Rev: 5 3-WIRE
; SVY_BAC MAG ONLY Any Hemisphere / Any Altitude.
Burst Enabled
; 10/13/02 REE   
MODEID = 249            ;TELL THE GSE THE IDENTIFIER
SLOT =  13              ;AND THE SLOT P={0..7}, F={8..15}
CURRENT = 200           ;POWER REQUIREMENT (IF KNOWN)
MODELOAD                ;FORMAT OF THE COMMAND LOG
CMDLOG FLD24905.LOG
.CMDS 42                ;#COMMANDS IN THE LOAD FILE
;
; << START THE MODE DEFINITION >>
;
STARTDEF.CMD
;
; Turn on sequence
;
.TABLE 12 0             ;Set FMODE = MODEID
.LOAD MODEID            ;
;
.CDD8FEFF               ;Disable TM of ADC, BBF, SFA, HFQ and SVY 1 & 2
.setbit 0xD5 8          ;Turn off WPC telemetry
.TABLE 0 0              ;Disable burst for 30 seconds
.LOAD 30
.setbit 0xF9 0          ;Turn on system 7, Fields Survey
.setbit 0xF8 14         ;Turn on system 4, Fluxgate Magnetometer
.clrbit 0xF8 6          ;Turn OFF system 6, BEBs 1 & 2, spheres 1-4
.clrbit 0xF8 7          ;Turn OFF system 23, BEBs 3 & 4, spheres 5-8
.clrbit 0xF8 8          ;Turn OFF system 24, Axial BEBs, spheres 9, 10
.setbit 0xF9 1          ;Turn on system 8, Analog B (burst)
.clrbit 0xF8 15         ;Turn off system 3, Search Coil Magnetometer
.clrbit 0xF9 2          ;Turn off system 9, SFA digital and HF clock
.clrbit 0xF9 3          ;Turn off system 10, SFA/DFS
.clrbit 0xF9 4          ;Turn off system 11, WPC, BBF, and HFQ
;
; ANALOG A/B
.CD800026               ;SVY 1/64 SPEED *** 3-WIRE CHANGE ***
.CD823102               ; ADC1-4: V14H, V58H, X, X
.CD830E9D               ; ADC5-8: X, Mag3, D8, V910
.CD8401AC               ; ADC7 MUX: Mag1,Mag2,Mag3,V12
.CD85FFFF               ; ADC8 MUX: V910     
.CD860009               ; TRIGGERS
.CD881851               ; ANB, BACKUP
;
; BEB1
; N/A
; 
; BEB2
; N/A
; 
; BEB3
; N/A
; 
; BEB4
; N/A
; 
; AXBEB
; N/A
; 
.TABLE 6 0x77           ; Load in eclipse/sun fields configurations.
.load 0x00              ; DISABLED.
.load 0x00              ; DISABLED.
.load 0x00              ; DISABLED.
;
; SFA
; N/A
; ANALOG C
; N/A
; 
; HSBM
; N/A
; DSP
; N/A
;
;
; FORMATTER
.CDD9FFFF               ; Rate SFA,ADC,BBF, SPO = F0 (MAG ONLY)
.CDD8FEFF               ; APID ON/OFF
.SETBIT 0xD5 8          ;prh 3/3/95 d5->0xd5
.61000007               ;Turn off HSBM, system 12 - executes after procedure
.60000007               ;Turn off DSP driver
; SLOW -> FAST
; 
; FAST -> SLOW
; 
; Define the Slow->Fast transition.
;
DEFFASTF.CMD
.LOADW 0x0026           ; SURVEY = 1/64, BACKUP.
.LOADW 0xCD80
.LOADMW 2 0     ;END OF COMMAND SET

; Define the Fast->Slow transition    
;
DEFSLOWF.CMD
.LOADW 0x0026           ; SURVEY = 1/64, BACKUP.
.LOADW 0xCD80
.LOADMW 2 0     ;END OF COMMAND SET
;
; << END THE MODE DEFINITION >>
;
ENDDEF.CMD