pidf v2_RPSB { $********************************************************************* float version = 2.0; $$ version string institution = "SwRI/MSFC"; $$ institute string project = "TSS"; $$ project string mission = "TSS-1R"; $$ mission string experiment = "ROPE"; $$ experiment string instrument = "ROPE"; $$ instrument string vinst = "RPSB"; $$ vinst $********************************************************************* int num_groups = 9; $$ no. groups string group_name = "FPS Command Status Words"; $$ group name string group_name = "PPS Command Status Words"; $$ group name string group_name = "High Voltage Unit Status"; $$ group name string group_name = "Grid Bias Command Status"; $$ group name string group_name = "Macro Commands"; $$ group name string group_name = "DIFP Commands"; $$ group name string group_name = "Floating Power Supply Control"; $$ group name string group_name = "Telemetry Test"; $$ group name string group_name = "End Of Command String"; $$ group name int plot_avail_flag = 0x1; $$ plot avail int data_type_mask = 0x11; $$ Sen/Scn/Cal/Mode/Qual int instrument_dep = 0; $$ avg over $********************************************************************* int num_bin_sets = 0; $$ no. bin sets $********************************************************************* int num_units = 6; $$ no. units struct Unit0 { $-------------------------UNIT 00------------------------------------- int id = 0; $$ unit id float min = -1.0; $$ unit min/max float max = 3.0; $$ unit min/max int unit_scaling = 1; $$ unit lin/log string unit_label = "unitless"; $$ unit label string long_description = "telemetry"; $$ long desc. string short_description = "raw"; $$ short desc. int num_tables = 0; $$ number of tables }; struct Unit1 { $-------------------------UNIT 01------------------------------------- int id = 0; $$ unit id float min = -1.0; $$ unit min/max float max = 258.0; $$ unit min/max int unit_scaling = 1; $$ unit lin/log string unit_label = "integer"; $$ unit label string long_description = "integer"; $$ long desc. string short_description = "int"; $$ short desc. int num_tables = 0; $$ number of tables }; struct Unit2 { $-------------------------UNIT 02------------------------------------- int id = 0; $$ unit id float min = -1.0; $$ unit min/max float max = 33.0; $$ unit min/max int unit_scaling = 1; $$ unit lin/log string unit_label = "integer"; $$ unit label string long_description = "integer"; $$ long desc. string short_description = "int"; $$ short desc. int num_tables = 0; $$ number of tables }; struct Unit3 { $-------------------------UNIT 03------------------------------------- int id = 0; $$ unit id float min = -1.0; $$ unit min/max float max = 128.0; $$ unit min/max int unit_scaling = 1; $$ unit lin/log string unit_label = "integer"; $$ unit label string long_description = "integer"; $$ long desc. string short_description = "int"; $$ short desc. int num_tables = 0; $$ number of tables }; struct Unit4 { $-------------------------UNIT 04------------------------------------- int id = 0; $$ unit id float min = -1.0; $$ unit min/max float max = 8.0; $$ unit min/max int unit_scaling = 1; $$ unit lin/log string unit_label = "integer"; $$ unit label string long_description = "integer"; $$ long desc. string short_description = "int"; $$ short desc. int num_tables = 0; $$ number of tables }; struct Unit5 { $-------------------------UNIT 05------------------------------------- int id = 0; $$ unit id float min = 0.0; $$ unit min/max float max = 70000.0; $$ unit min/max int unit_scaling = 1; $$ unit lin/log string unit_label = "integer"; $$ unit label string long_description = "integer"; $$ long desc. string short_description = "int"; $$ short desc. int num_tables = 0; $$ number of tables }; $********************************************************************* int num_sensors = 16; $$ no. of sensors struct Sensor0 { $-----------------------SENSOR 00------------------------------------- string name = "FPS Start Step"; $$ sensor name string component = "Start Step"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 0; $$ pidf sensor num int vidf_sensor_num = 0; $$ sensor vidf no. int group_num = 0; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 1; $$ unit numbers }; struct Sensor1 { $-----------------------SENSOR 01------------------------------------- string name = "FPS Skip Step"; $$ sensor name string component = "Skip Step"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 1; $$ pidf sensor num int vidf_sensor_num = 1; $$ sensor vidf no. int group_num = 0; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 2; $$ unit numbers }; struct Sensor2 { $-----------------------SENSOR 02------------------------------------- string name = "FPS Stop Step"; $$ sensor name string component = "Stop Step"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 2; $$ pidf sensor num int vidf_sensor_num = 2; $$ sensor vidf no. int group_num = 0; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 1; $$ unit numbers }; struct Sensor3 { $-----------------------SENSOR 03------------------------------------- string name = "PPS1 Start Step"; $$ sensor name string component = "PPS1 Start Step"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 3; $$ pidf sensor num int vidf_sensor_num = 3; $$ sensor vidf no. int group_num = 1; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 3; $$ unit numbers }; struct Sensor4 { $-----------------------SENSOR 04------------------------------------- string name = "PPS1 Skip Step"; $$ sensor name string component = "PPS1 Skip Step"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 4; $$ pidf sensor num int vidf_sensor_num = 4; $$ sensor vidf no. int group_num = 1; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 4; $$ unit numbers }; struct Sensor5 { $-----------------------SENSOR 05------------------------------------- string name = "PPS1 Stop Step"; $$ sensor name string component = "PPS1 Stop Step"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 5; $$ pidf sensor num int vidf_sensor_num = 5; $$ sensor vidf no. int group_num = 1; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 3; $$ unit numbers }; struct Sensor6 { $-----------------------SENSOR 06------------------------------------- string name = "PPS2 Start Step"; $$ sensor name string component = "PPS2 Start Step"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 6; $$ pidf sensor num int vidf_sensor_num = 6; $$ sensor vidf no. int group_num = 1; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 3; $$ unit numbers }; struct Sensor7 { $-----------------------SENSOR 07------------------------------------- string name = "PPS2 Skip Step"; $$ sensor name string component = "PPS2 Skip Step"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 7; $$ pidf sensor num int vidf_sensor_num = 7; $$ sensor vidf no. int group_num = 1; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 4; $$ unit numbers }; struct Sensor8 { $-----------------------SENSOR 08------------------------------------- string name = "PPS2 Stop Step"; $$ sensor name string component = "PPS2 Stop Step"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 8; $$ pidf sensor num int vidf_sensor_num = 8; $$ sensor vidf no. int group_num = 1; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 3; $$ unit numbers }; struct Sensor9 { $-----------------------SENSOR 09------------------------------------- string name = "HVU Status"; $$ sensor name string component = "N/A"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 9; $$ pidf sensor num int vidf_sensor_num = 9; $$ sensor vidf no. int group_num = 2; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 5; $$ unit numbers }; struct Sensor10 { $-----------------------SENSOR 10------------------------------------- string name = "Grid Bias Status"; $$ sensor name string component = "N/A"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 10; $$ pidf sensor num int vidf_sensor_num = 10; $$ sensor vidf no. int group_num = 3; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 5; $$ unit numbers }; struct Sensor11 { $-----------------------SENSOR 11------------------------------------- string name = "Macro Cmds"; $$ sensor name string component = "N/A"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 11; $$ pidf sensor num int vidf_sensor_num = 11; $$ sensor vidf no. int group_num = 4; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 5; $$ unit numbers }; struct Sensor12 { $-----------------------SENSOR 12------------------------------------- string name = "DIFP Cmds"; $$ sensor name string component = "N/A"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 12; $$ pidf sensor num int vidf_sensor_num = 12; $$ sensor vidf no. int group_num = 5; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 5; $$ unit numbers }; struct Sensor13 { $-----------------------SENSOR 13------------------------------------- string name = "FPS Cmds"; $$ sensor name string component = "N/A"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 13; $$ pidf sensor num int vidf_sensor_num = 13; $$ sensor vidf no. int group_num = 6; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 5; $$ unit numbers }; struct Sensor14 { $-----------------------SENSOR 14------------------------------------- string name = "Tele Test"; $$ sensor name string component = "N/A"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 14; $$ pidf sensor num int vidf_sensor_num = 14; $$ sensor vidf no. int group_num = 7; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 5; $$ unit numbers }; struct Sensor15 { $-----------------------SENSOR 15------------------------------------- string name = "End Cmd"; $$ sensor name string component = "N/A"; $$ component name char source = 'V'; $$ source (V) (S) string scf_filename = "N/A"; $$ not applicable int pidf_sensor_num = 15; $$ pidf sensor num int vidf_sensor_num = 15; $$ sensor vidf no. int group_num = 8; $$ sensor group no. int display_flag = 1; $$ display bit int num_units = 1; $$ no. of units int unit_number = 5; $$ unit numbers }; struct DataQual { $********************************************************************* string name = "Data Quality"; $$ dqual name string short_name = "Dqual"; $$ dqual name int num_units = 1; $$ no. of units int unit_number = 0; $$ unit numbers }; }